How Much Electricity Does an Automatic Ironing Machine Use?

How much electricity an automatic ironing machine uses depends on its power draw and how long it runs. The cost then depends on your electricity tariff. A short cycle alone cannot tell you the price per garment, and a wattage figure alone cannot tell you the energy used during a complete session.

Use the method below to make an estimate for your own appliance. The worked example is illustrative; it is not a measured Aironox result.

Find three numbers

You need the appliance's power in watts, the running time in minutes and your electricity unit rate per kilowatt-hour (kWh). Check the appliance label or manual for power information and your bill for the unit rate.

Rated power gives you a starting point. Actual draw can vary with operation and settings, so a measured cycle is more useful when you need a precise figure. Virginia Tech's energy-use guide explains the relationship between power, time and cost.

Convert minutes into energy and cost

Imagine an appliance drawing a steady 1,000 W for 12 minutes, with an electricity rate of £0.25 per kWh. The calculation is 1 × 0.2 = 0.2 kWh, followed by 0.2 × £0.25 = £0.05.

That hypothetical session costs 5p. Twenty identical sessions would cost £1. These figures are chosen only to show the arithmetic: they are neither Aironox specifications nor an estimate of your tariff. The calculation excludes any fixed daily standing charge.

Record the whole clothing-care session

For a useful household estimate, keep a short record of what you actually do. Note the garment, its starting condition, the settings used, the complete running time and whether you needed additional finishing afterwards.

This turns “one shirt” into a repeatable description. A slightly damp lightweight shirt and a heavier garment starting much wetter are different jobs. Your record should reflect the job you normally need done, rather than the shortest session you can create.

If you use a plug-in energy meter, choose one correctly rated for the appliance and follow both manufacturers' instructions. Record the total kWh for the complete session rather than relying on a single instantaneous reading.

Compare methods on the same basis

Before comparing an automatic machine with an iron or dryer, decide what counts as finishing the job. Are both methods starting with clothes in the same condition? Are you including a separate drying stage for one method? Is the final finish acceptable to you in both cases?

Do not compare a full tumble-dryer load with one shirt without accounting for the different amount of clothing. Also keep energy and hands-on effort as separate questions: a routine you find more convenient does not automatically use less electricity.

Build your estimate around your own use

Check Aironox HOME for current product information and the manual for operating guidance. If you need help identifying the specification for your model, contact our team before calculating.

Start with one representative session, then multiply by the number you actually expect to run. That gives you a household estimate you can explain and update when your routine or tariff changes.